Help

NETWORK SETTINGS

Use SonicIP
If set to "yes", the device will announce its IP address over the audio output during device startup.
Default: "yes"

Protocol
Select the desired protocol between:
DHCP for automatic IP discovery
Static for a static internal LAN IP
Default: "DHCP"

IP Address
Enter the 4 values of the desired device IP address e.g.:
"192.168.0.12" for an internal LAN
Default: "0.0.0.0"

Netmask
Enter the 4 values of the desired Static IP e.g.:
"0.0.0.0" for a default Netmask depending on the used IP Address.
"255.255.255.0" for a C class network
Default: "255.255.255.0"

Gateway IP Address
Enter the 4 values of the desired Gateway IP address e.g.:
"0.0.0.0" for no Gateway
"192.168.0.1" for a Gateway in a LAN
Note: The Gateway has to be set only when connecting to other devices over the WAN (through a router).
Default: "0.0.0.0"

Primary DNS
In this field you can give the Barix device the desired primary and alternativ DNS IP address to be able to connect to URLs (e.g. www.radio.com).
Example: "195.186.1.111"
Default: "0.0.0.0"

Alternative DNS
In this field you can give the Barix device the desired alternativ DNS IP address in case the primary DNS is not reachable.
Example: "195.186.4.111"
Default: "0.0.0.0"

DHCP Host Name
Name of the device sent in DHCP request. If left empty, a name based on the device's MAC address is generated automatically. Enter up to 15 Characters.

Web Server Port
Defines the port where the webserver of the Barix device can be reached. If set to "0" the default HTTP port (80) is used.